1.Rotary Table Intelligent Assembly Machine adopts numerical control tool

After the first installation of the tool, after a period of cutting, it has worn out and needs sharpening. After smoothing common tools, the tip position changes during reinstallation and needs to be adjusted again. CNC cutting tools are characterized by high precision in tool manufacturing, repeated positioning accuracy after blade rotation is about 0.02mm, which greatly reduces the setting time of the tool: at the same time, the surface of the CNC machine tool is coated with a wear-resistant layer (SiC, TiC, etc.), which can greatly improve its durability (3-5 times), but the cost is high.

2.CNC machine tool control center adopts the tool setting method

The tool matching machine is equipped with a self-testing device, but the operation of CNC machine tools is complicated, and it still needs to spend a certain amount of preparation time. Suitable for multi-tool measurement.

3. Click the knife set method

Press and hold the point key on the control panel, touch the tool tip lightly on the surface of the workpiece to be machined (the X and Z directions are clicked twice), the counter is cleared to zero, and then back to the initial position to be set (the initial value of X and Z design), and then clear to get the initial position of the tool. The commonly used Rotary Table Intelligent Assembly Machine tool method determines the initial position of each knife in turn, and then adjusts to the accurate design position (starting point) after test processing. This method does not require any auxiliary tools and can be operated readily, but the time is longer, especially if the tool must be readjusted once every time. This method is suitable for simple operation or initial installation and debugging.

Rotary Table Intelligent Assembly Machine https://www.zjshuangzheng.com/Rotary-Table-Intelligent-Assembly-Machine.html